Physics, GE253, wk#7

Trung class: GE253, wk#7
Please read chapter 7 and do two problems
Please make sure you understand stress, strain, Young's modulus in solid section
Please make sure you understand the differences between solid and fluid
Please make sure you understand the calculation of pressure in fluid as well as the major impact of the "h" variable in calculating pressure.
It is best to revisit the calculation of area and volume of a cylinder

Please visit: http://wps.pearsoncustom.com/pcp_wilson_ittphysics_5/32/8224/2105451.cw/-/t/index.html (or just simply click on this link) to explore each online chapter. Then use ch.1 to 6 to do the make-up tests. Then use this online website automatic sender option to send the automatic computer graded result to the course instructor: trungtchiong@yahoo.com or ttchiong@itt-tech.edu.

We will be using this online physics website for our chapter 8,9,10 homeworks. You will be sending the computer graded homework to the same above email address(es). And you are allowed to have infinite time and trials in this website.

Have fun!
Thanks.

Physics- GE 253

Trung class: Before you come to class on Thursday night (1/29/2009) please visit the provided website:
http://www.pearsoncustom.com/itt/GE253_Physics/

and try out some problems on work and energy as well as momentum and collision problems.
Please use this website to send the result to my school email: ttchiong@itt-tech.edu

How?
Click on the link, click on the companion website, click on instructor icon (at the bottom of the screen), then click on TOC (ex: http://wps.pearsoncustom.com/pcp_wilson_ittphysics_5/32/8224/2105451.cw/-/t/index.html) The select related chapters.

This is a trial run, please do not hesitate to send the results.
Have fun!

Math II , wk#7 - Ch.4

Please read chapter 4 and use www.interactmath.com to solve 4 problems on geometric and arithmetic series. Then do one problem on summation of the first 4 terms of a given geometric series.
Have a great day!

CD140

This week assignment is to read pages 99-122

Project 2 is Due Saturday 1/31/09.

Project 2
Students should create a black-and-white drawing of a still life they can assemble
at home. They should explore the full range of values that they have on their tenstep
value chart. The drawing should be presented to the class during the sixth unit.

Trung CD-240, week#6

Please read vector geometry and scalar geometry
Then do 2hws on vector geometry and 2 for the scalar geometry

Please work on the Inventor step-by-step package to create the solid model of the bracket and its drawing with views (third angle projection). Please use AutoDesk INVENTOR software. Do not use AutoCAD to produce this assignment.

Thanks.

Physics - GE253 week 6

Trung- Physics, wk#6:
Please read the work and power chapter. Then do 4 problems on work (kinetic and potential energy and displacement) and power (work over a period).

Please submit your team project on week #7.
Thanks.

Math 2, week 6

Trung - GE 192: Math 2.
Please read the Vector chapter and do 4 problems on adding and dot product.
Thanks.

CD140 Rapid Visualization

read 79-97
project 1 due 1/24/09

CD 240: Descriptive Geometry
Instructor: Trung Tchiong
Please read the tolerance chapter and do two problems on this area.
1: Calculate the clearance of a shaft and bearing assembly (use www.sdp-si.com for part dimensions)
2: Calculate the Interference of the shaft and bearing assembly (use the same website). Please use the shaft size of dia. .375in +/- .001in and maximum interference of .004in
3: Please work on your final package (due wk#11) and the Inventor package (due 1/30).

Have a great weekend!

Trung/ Physics course: week 5- work and energy ch.5

Please read ch.5 and do two problems on work and potential energy.
Please contact Dean Varma prior to bringing in supplies to complete your team projects. Please do not bring any supplies that did not have the final approval from our Dean.
Make sure you communicate with your team members so that the prototype and the report is done at 9PM on week #6.
Test#2 is scheduled on week #7.
Have a funfilled day!

Civil Drafting - Class #5

CD 310 - Civil Drafting and Introduction to GIS
January 15, 2009 - Class #5
Richard Pardys, Instructor, Phone - 215-763-0842, rpardys@itt-tech.edu

Lab tonight
Coordinate with your classmates, and demarcate the area of the island that you will be working on.

I will talk with each of you individually about your particular project, and the sheets you should be developing. Work in class today will help you get a start on what’s due for your 30% next week.

Homework
Read Chapter 5For Chapter 5, do the odd text questions on pp 111-112, and problems P5-1 and P5-2 a and b on pp 112 and 113

Math ii: trung class, GE192.
Week#5
Please review law of sines and cosines
Please read ch. 3.4 for complex number
Please use www.interactmath.com to review ch. 3.4 (do 4 exercises)
Submit 4 solved problems to Trung by next class.
Thanks.

My Regards from Syria

hello all
I would like to say Happy new year to every one..
sorry being late.. I will see you all on Monday 1/19/2009
looking to see you
Ashraf

Intro to Drafting and Design - Class #5

CD 111 Introduction to Design and Drafting
January 15, 2009 Class #5
Richard Pardys, Instructor, Phone - 215-763-0842, rpardys@itt-tech.edu

Homework due Next Week
Read Chapter 5.
Answer the 5 review questions and give a definition for all the keywords on page 155.
Study for your Midterm

Midterm next week
25 multiple choice questions
Worth 15% of your total grade.

Capstone - Class #5

CD 331 Design and Drafting Capstone Project
January 12, 2009 Week #5
Richard Pardys, Instructor, Phone - 215-763-0842, rpardys@itt-tech.edu

Homework due next Week

Reading
Read Chapter 4.

Group Manual Homework
Develop a Project Description, Design Specifications and Design Description. The requirements for these are shown on page 83, Section 3.3 of your book. Each of these three items should be long enough to develop the issue completely. The Design Description requires preparing drawings to go with your work. The drawings should be reduced if necessary to fit on an 8 ½ x 11 report format. This is to be handed in next week. This is a group effort, and you all will be graded on it.

Prepare a contract letter to go in the manual. All your group members must sign the contract letter along with me. I am the client in each case. See Appendix D on page 259 in your book for a sample of how to make this letter.

Also, please hand in the “List of Drawings”, “List of Tasks” and the “Bar-Chart Schedule” and the budget..

30% Pin-Up Next Week
Refine all your drawings in sketch form. Add at least one new sheet per student.
All sketches should be a minimum size of 18” x 24”.
We’ll begin putting this on CAD next week after the 30% Review.

Intro to AutoCAD Class #5

CD 121 Drafting and CAD Methods
January 13, 2009 – Class #5
Richard Pardys, Instructor, Phone - 215-763-0842, rpardys@itt-tech.edu

Lab Today
Tonight until 10:00, Draw either the calculator or the front view of the ’32 Ford Special. Both are on page 218, but the instructions for the calculator are on page 217. You do not need to draw the side view of the car, as this was last week’s assignment. You will get extra credit if you’re able to do both activities by 10:00.

Homework for next week
Read Chapter 6 in your book.

Do the Multiple Choice exercises 1 to 8, and the True/False Questions 1-7 at the end of the chapter.

Practice for your midterm.

Midterm Exam
Next Week. Worth 15% of your grade

Math 2 - Wk#4

Please visit www.interactmath.com to practice all missing homework. There you will find a step by step and look-alike problems for practicing

Please review all 6 properties of Log

Please review and work on 4 problems of Law of Sines and Cosines

Quiz: Goto page 135, example 1. Give yourselve dimensions of 3 edges of this triangle as printed in the book: c=56in; a=45.2in and b=59.4in
Find: all three missing angles. Make sure you show step-by-step solution. Then compare your number to the book.
Have a great day!

Physics class- Wk#4 Newton 3 laws

Read chapter 3 with 3 Newton's Laws
Do submit problem #25 (ch.3)
Work on your team/individual project
Notes: One of your classmates had done the Fire-lantern (Ch.8; temperature)- Good Job!
Have a great day!

CD-240 Descriptive Geometry - Friday night, wk4

Read chapter 4
Sketch the revolve section of our ITT-KOP trash can
Use AutoCAD to re-produce the same drawing with dimensions
Work on the Final design package.
See the Instructor for additional questions.
Have a great day!

Intro to Drafting and Design - Class #4

CD 111 Introduction to Design and Drafting
January 8, 2009 Class #4
Richard Pardys, Instructor, Phone - 215-763-0842, rpardys@itt-tech.edu

Homework due Next Week
Read Chapter 4, and answer questions 1-9 on page 120.
On page 124, sketch front, top and right-side views for items 1,2,3 and 5. Do each of these four items on one 8.5 x 11 sheet. Each sheet should have three views of the particular item, and each view should be labeled. Sketches should be proportionate in size as to what is in the book. Measuring is nit needed.

Midterm is two weeks
25 multiple choice questions
Worth 15% of your total grade.
We’ll review for it next week.

Intro to AutoCAD Class #4

CD 121 Drafting and CAD Methods
January 6, 2009 – Class #4
Richard Pardys, Instructor, Phone - 215-763-0842, rpardys@itt-tech.edu

Lab Today
Tonight until 10:00, do either 4-1 or 4-2 on page 166. You may do the second problem for extra credit. Total extra-credit value – 110%.

Homework for next week

Read Chapter 5 in your book from page 173 to 194 and 202 to 216. Information on advanced snapping modes is not necessary.

Do all multiple choice questions at the end of the chapter except numbers 9, 10, and 11.and all true/false questions at the end of the chapter except numbers 8 and 9.

Capstone Class #4 Homework

CD 331 Design and Drafting Capstone Project
January 5, 2009 Week #4
Richard Pardys, Instructor, Phone - 215-763-0842, rpardys@itt-tech.edu

Homework due next Week

Reading
Read Chapter 4.

Group Manual Homework
Develop a Project Description, Design Specifications and Design Description. The requirements for these are shown on page 83, Section 3.3 of your book. Each of these three items should be long enough to develop the issue completely. The Design Description requires preparing drawings to go with your work. The drawings should be reduced if necessary to fit on an 8 ½ x 11 report format. This is to be handed in next week. This is a group effort, and you all will be graded on it.

Prepare a contract letter to go in the manual. All your group members must sign the contract letter along with me. I am the client in each case. See Appendix D on page 259 in your book for a sample of how to make this letter.

Also, please hand in the “List of Drawings”, “List of Tasks” and the “Bar-Chart Schedule” and the budget..

30% Pin-Up Next Week
Refine all your drawings in sketch form. Add at least one new sheet per student.
All sketches should be a minimum size of 18” x 24”.
We’ll begin putting this on CAD next week after the 30% Review.

CD140 Rapid Visualization

Welcome back students from the holidays! This Saturday 1/10/09 we will pick up with Unit 3. Please read pages 54-71 of your text books for your assignmnet prior to class.

~See you Saturday,
Mr. Grenon